Hole gripper or Solid gripper.
$8.00 each
(2 stainless steel tension hold screws )
$1.00
(4 nylon screws )
$1.00
Push Rods
$3.50
3 sizes available
Silicone O- rings are 2 for $1.00
for retaining
  • Brand  >  Alliance
  • Product >  Advantage
  • size #32
 
Tug pin used for converting the DTR into a tugger.

Sizes
[ Home ] [ Contact ]
size
Gripper choice
Estrap ( tugging strap )
$7.50
Gripper choice
Retainer and gripper with nylon screw set.
Choose solid gripper or one with holes
Available in 3 to 7 inch lengths with 6 inch being the most common size used
Terms and Conditions Agreement Disclaimer:

The owner of this web site and anyone contributing to it cannot be made responsible for injuries or other harm resulting from following the advice or information found on this web site or any web sites it links to. The reader (you) is solely responsible for using the information found on the website. Therefore, it is in the reader's best interest to use the information as advice, not as a manual. Where any medical, psychological or apparent medical or psychological advice is given it is the reader's responsibility to check the advice and to take competent qualified medical or other advice before taking any action.
Nothing in this web site is meant as, or should be taken as, medical advice. If you are interested in foreskin restoration, consult a physician. Because no two individuals are the same and
you are likely to have special needs, all restoration activities should be carried out under the supervision of a physician. None of the authors of these pages make any guarantees concerning the
information or techniques contained here or the uses to which they are put. Products mentioned are provided for information
only, and not recommended or guaranteed or refunded.
All products sold on this web site are sold as adult novelty products only, and any other uses are solely at the purchaser's discretion.
The web site owner, web site administrators, and the manufacturer of all products sold on this web-site make no representations of any kind, expressed or implied as to the operation of this web site or any materials or products included on this web site.

The information presented on this web site is meant for entertainment purposes only and is not intended as a resource for those with medical problems.

The descriptions of exercises on this web site are only examples of what other people have done or might do with the product sold on this web site. It is not recommended, suggested or implied that you emulate any of the exercises described on this web-site. The choice is yours completely, and you are solely responsible for anything that you decide to do with any information available on this web site or any products sold on this web site. The providers, owners, employees and creators of this web site, and the manufacturer of all products sold on this web site accept no responsibility, make no warranties (expressed or implied), and will not be held liable for the safety or the efficacy of this product - whether or not it is used in accordance with its intended function. The user of this web site and/or purchaser of any products sold on this web site must agree to take absolute responsibility for the use of any information available on this web site, use of any products sold on this web site, for any effects from using any information from this web-site, or any effects from using products sold on this web site.


By accessing this web site, you are releasing and discharging the providers, owners, employees and creators of this web-site, and the manufacturer of all products sold on this web site from and against any claims, liabilities, losses, costs, damages or expenses (including attorney's fees), any and all liability which might arise from the user's use of or participation in this service or the information or products contained thereon.
By submitting payment information through this web-site or by accessing any portion of this web site, you agree that you have read, understand, and agree to abide by this Terms and Conditions Agreement, and any documents incorporated by reference, and you agree that you intend to form a legally binding contract and that this Terms and Conditions Agreement constitutes "a writing signed by You" under any applicable law or regulation.

Used with retainer for optional packing method.
1/4 inch ( 6 -7 mm) and 1/2 inch( 12 - 13 mm )
3 size screws and wingnuts included
$2.50 pack of 3 sizes
Spare Retainer screw/wingnut used for weight or spacers.
Set includes one of each size
$15 ( set of 2 )
2 inch ( 50.8mm )
2 1/2 inch ( 63.50mm )
3 inch ( 75.60mm )
Shipping prices are as follows:
USA orders] $4.95  first class shipping,
[Canadian orders] $13.50
USD first-class shipping. [Australia, New zeraland] $17.50  [all other countries] $14.95 USD first class shipping.
Packaging ]
Very discreet with no reference to the website or what's inside the package..
Customs form :
Outside USA orders will list contents on customs form as "nylon spacers", "Silicone seals" ,"nylon rods" etc"


        
Delivery time for most countries outside the USA is under two weeks however please note that it can take longer.
DTR , Retainer,Spacers and Push plates are handmade on a lathe.  Not CNC or 3D printed.
$2.00 each
Return policy
  • DTR bell
  • 4 elastic anchor screws
  • 2 stainless push rod hold screws
  • Tug pin
  • Gripper ( choose solid or holes )
Gripper choice
Choose gripper style for the DTR
Push plate style
Push plates are used for Dual tension method along with a push rod.
Grippers are interchangeable between the DTR bell and retainer.
Push Rods are used for the Dual tension method along with a push plate.
E-strap used for tugging method
Push plates used for Dual tension method.
Elastics used with Dual tension method.
Used with DTR or Retainer.
$12.50
$3.00
DTR bell pack
Because everything is hand made the delay time before an order is ready to be shipped will be...
1 to 5 days
4 to 11 days
5 to 14 days
Delay time for
!Push plates require a push rod to use them!
June  2021
 All items are sold as adult novelties and are not medical devices.


  • 24 inch silicone tube with insert
  • 6 inch piece of flex-film
  • 2 binder clips (Tube clamp)
  • 34 inch elastic bandage wrap
  • 1, 8 inch Velcro strap
  • 1 Bell Skin
Because of the nature of what these items are used for there are no returns. All parts are made to order by request. In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products .    California residents Proposition 65
Stainless steel/nylon screw used to lock push rod in place when not using elastic tension.
Short nylon screw used to anchor elastic bands to the DTR bell when using elastic tension.
New design
* Please Read *
A tracking # will be sent via e-mail the day your package is sent out.
$35.00
DTR kit
Push plate & gripper option
Choose Push plate & gripper style.
  • DTR bell
  • Push plate
  • Gripper
  • 4 inch push rod
  • 6 inch push rod
  • Tug-Pin
  • Elastics
  • 4 elastic anchor screws
  • 2 SS hold screws
Good for tugging method when used with an elastic strap
Mag connector
To connect a magnet to the DTR or Retainer.
$2.00 For set of ( 2 sizes )
Condom catheter
Used for  :
Used for  :
( Limit 3 per order do to availability )
(Please Limit purchase up to 1 of each style due to supply)
This will be the only order confirmation you will receive
Standard
Notched
$20    $25
I do not ship to the following countries at this time due to shipping issues.
If you have any questions please Email me
$75
$49.50
 South Africa, Spain, Russia, Mexico, Brazil, Korea , China, Taiwan, Japan, Singapore, India, Indonesia, Italy, Greece, UAE, and the United Kingdom
DTR/bell pack( The core of the DTR )  Same DTR Bell used in the Kit above.
This is the "DTR kit" that I made available since 2005.
I found this brand of elastics last longer than most.These can be purchased online in bulk easily. 

This is the brand of elastics I used.
Effective Jan 1, 2021, value added tax (VAT) must be collected for all goods entering the United Kingdom (UK) Sorry , but I will not be a Tax collector for Politicians in the UK. I will no longer accept UK orders until further notice. Very sorry to all Restoring UK brothers.